juan Site Admin
註冊時間: 2004-03-31 文章: 54 來自: Taiwan
|
發表於: 星期三 四月 21, 2004 11:47 pm 文章主題: Soalris 2.x 的 PPP 之設定 |
|
|
發信人:freedom@csie.nctu.edu.tw (Tan Koan-Sin)
日期:23 May 1996 08:49:31 GMT
標題:Soalris 2.x 的 PPP 之設定
信群:tw.bbs.comp.unix 看板:
代號:<4o18qr$5rv@news.csie.nctu.edu.tw>
組織:Taiwan
設定 Solaris 2 的 ppp
Solaris 2 的 asppp (asynchronous ppp) 使用到不少 UUCP 的設定檔
如果你對 UUCP 有一定的概念, 那再好不過了
(關於 UUCP 請參見 RFC 976, 1137)
底下將以交大的 Terminal Server 為例
示範 Solaris 2 ppp 的使用方法
0. 請先確定你的系統有 UUCP 與 PPP
> pkginfo | egrep "PPP|UUCP"
所得結果當是:
application SUNWapppA Dial-up PPP Administration
system SUNWapppr PPP/IP Asynchronous PPP daemon configuration files
system SUNWapppu PPP/IP Asynchronous PPP daemon and PPP login service
system SUNWbnur Networking UUCP Utilities, (Root)
system SUNWbnuu Networking UUCP Utilities, (Usr)
system SUNWpppk PPP/IP and IPdialup Device Drivers
1. 設定 /etc/uucp/Systems 並用 cu -d -L 來測試之
例如,我的 /etc/uucp/Systems 內容是這麼寫的:
nctu Any ACU 38400 730600 oice: 6\n
用 :
cu -d -L nctu
來看看撥號與選擇 ppp 是否正常
(交大 terminal server 的選擇畫面最後一個字是 choice:
選項 6 是 ppp)
如果你的是接在 com1, 還得改一改 /etc/uucp/Devices
2. 在 /etc/gateways 中加入
norip ipdptp0
告訴 routed 說不要用 RIP(Routing Information Protocol, 參見 RFC 1058, 1723)
3. 若 /etc/nsswitch.conf 中寫的是
hosts: files
請改為
hosts: files dns
4. 在 /etc/resolv.conf 中加入適當的 nameserv
例如交大的 server 是:
nameserver 140.113.1.1
domain nctu.edu.tw
5. 在 /etc/hosts 中加入
0.0.0.0 void
140.126.1.1 nctu # address 隨便寫, 反正 ppp 會幫你設出正確值
6. 寫好 /etc/asppp.conf, 我的 asppp.conf
ifconfig ipdptp0 plumb void nctu down
path
inactivity_timeout 120
interface ipdptp0
peer_system_name nctu
default_route
7. 寫個如下的 shell script, 把它叫 "attach", 挑個你喜歡的地方放
#!/bin/sh
detach $1
ifc_cmd=`egrep "^ifconfig.*$1" /etc/asppp.cf`
ifc=`echo $ifc_cmd | awk '{print $2}'`
ifconfig $ifc up
route add default $1 1 >/dev/null
ping $1
8. 寫個如下的 shell script, 把它叫 "detach", 挑個你喜歡的地方放
#!/bin/sh
ifc_cmd=`egrep "^ifconfig.*$1" /etc/asppp.cf`
ifc=`echo $ifc_cmd | awk '{print $2}'`
if [ -n "`ifconfig -a | grep $ifc`" ]
then
ifconfig $ifc down
id=`ps -e | grep aspppd | awk '{print $1}`
if test -n "$id"
then
kill -1 $id
fi
ifconfig $ifc unplumb
fi
eval $ifc_cmd
exit 0
把 attach 與 detach 所在的目錄加進你的 $PATH 中
重新開機後, 就大功告成了,
用 "attach nctu"/"detach nctu" 就可以連接/切斷與交大 terminal server 的 ppp
Bibliography:
1. Peter Block , "Solaris 2.4, PPP and dynamic address"
2. M. Horton, "UUCP mail interchange format standard", 02/01/1986(RFC1137)
3. SunSoft, "TCP/IP Network Administration Guide"
4. W. Simpson, "The Point-to-Point Protocol (PPP)", 07/21/1994.(RFC1661)
5. W. Simpson, "PPP in HDLC-like Framing", 07/21/1994.(RFC1662)
PS. Solaris 2.x 的 PPP 不支援 PAP, 所以若你的 ISP 要求 PAP 請由
ftp://nctuccca.edu.tw/UNIX/networking/ppp/dp 或
ftp://nctuccca.edu.tw/UNIX/networking/ppp/ppp 底下的東西
--
有南威之容,乃可以論其淑媛
有龍泉之利,乃可以議其斷割 _________________ This is Juan (https://juan.tw)
I'd like to be a teardrop,
To be born in your eye,
To live my life on your cheek,
And on your lips to die. |
|